Description
With this camera cable allows you to replace the standard 30 cm long flexible cable of a Raspberry Pi camera or a Raspberry Pi display. Use our flexible ribbon cableto connect your camera module to your Raspberry Pi. Works perfectly, just carefully open the Pi's connector and plug it in.
The flex cable plugs into the connector located between the Ethernet and HDMI ports, with the silver plugs facing the HDMI port. The flexible cable plug is opened by pulling the tabs on the top of the plug upwards and then towards the Ethernet port. The flex cable is inserted firmly into the plug, taking care not to bend the flex too much. The upper part of the plug is then pushed towards the HDMI plug and downwards while the flexible cable is held in place